Jenn Air Washer/Dryer Combo Parts (498 results)

Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.

OEM Part - Manufacturer #W10169313

Universal Connect Flexable Vent. 4" diameter extends to five feet.

OEM Part - Manufacturer #4396009RP

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 314820 Tumbler Seal.

OEM Part - Manufacturer #WP314820

Some dryers have this seal secured with metal tabs while others require the recommended High Temperature Adhesive below. Best to check out the seal before ordering.

Maytag two belt washing machine drain pump. If the washer does not drain then the pump could be clogged or defective.

OEM Part - Manufacturer #WP6-2022030

Consider replacing the belts while you have the washer apart.

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 596669 Hose Clamp.

OEM Part - Manufacturer #WP596669

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 12001677 Injector Valve and Nozzle.

OEM Part - Manufacturer #12001677

Screw, 10-24 3/8

OEM Part - Manufacturer #WP90767

This is a Genuine Replacement Part ,The Model Number and Name for the Following Item: Whirlpool (WHIRA) 285655 Clamp - Hose.

OEM Part - Manufacturer #WP285655

Light bulb, 7 Watt

OEM Part - Manufacturer #W10857122

Washing machine tub bearing repair kit. The tub bearing is mounted in the middle of the outer tub of the washing machine. The tub bearing helps to keep the inner tub spinning smoothly. If the tub bearing is defective, it may lock up and prevent the washer from spinning.

OEM Part - Manufacturer #6-2040130

The tub bearing and tub seal should be replaced together.

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 76314 Fill Hose.

OEM Part - Manufacturer #WP76314

Replace inlet hoses after 5 years of use to reduce the risk of hose failure.

Dryer high-limit thermostat, L220-40F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.

OEM Part - Manufacturer #WP303395

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 205613 Washer Water Inlet Valve.

OEM Part - Manufacturer #205613