Jenn Air JDE1000A Dryer Replacement Parts

Snap retaining ring

OEM Part - Manufacturer #WP9703438

Self-tapping screw.

OEM Part - Manufacturer #WP489483

Screw, 10-24 3/8

OEM Part - Manufacturer #WP90767

Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.

OEM Part - Manufacturer #LA-1053

The thermal fuse often blows when the exhaust vent gets clogged with lint. The vent should be cleaned once a year especially if it is longer than 15 feet.

Dryer blower wheel, 3-1/8" deep, 8" in diameter, 7-1/8" hub diameter, 20 standard fins, ½" diameter motor shaft, 3/8" motor shaft diameter to flat side of shaft. If more than one blower wheel is listed with your model, call us with your model and serial number to verify the part.

OEM Part - Manufacturer #W11497304

Dryer lint filter (lint trap). Your lint filter should be replaced if it is torn or damaged in any way.

OEM Part - Manufacturer #WP53-0918

Door catch kit, includes catch and clip (metal) Replace both parts for best results

OEM Part - Manufacturer #LA-1003

Screw

OEM Part - Manufacturer #WP3196164

Spring clamp for blower wheel

OEM Part - Manufacturer #WP312967

Heating element assembly with replacement high limit thermostat, L248-80 (240 Volt, 4750 Watt). Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

OEM Part - Manufacturer #LA-1044

Dryer drum drive motor assembly. If the dryer does not start the motor could be bad. Before replacing the motor the door switch and thermal fuse should be tested to determine if they are defective.

OEM Part - Manufacturer #W10410996

Drum glide kit, right side. *Pad has adhesive backing

OEM Part - Manufacturer #LA-1006

Screw

OEM Part - Manufacturer #WP489478