Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.

OEM Part - Manufacturer #279834

Snap retaining ring. Used to keep rollers and idler wheels in place

OEM Part - Manufacturer #WP9703438

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

OEM Part - Manufacturer #WP338906

Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.

OEM Part - Manufacturer #LA-1053

The thermal fuse often blows when the exhaust vent gets clogged with lint. The vent should be cleaned once a year especially if it is longer than 15 feet.

Self-tapping screw.

OEM Part - Manufacturer #WP489483

Dryer lint filter (lint trap). Your lint filter should be replaced if it is torn or damaged in any way.

OEM Part - Manufacturer #WP53-0918

Screw, 10-24 3/8

OEM Part - Manufacturer #WP90767

Screw & Washer

OEM Part - Manufacturer #WP3196557

Top screw

OEM Part - Manufacturer #WP3196164

Door catch kit, includes catch and clip (metal) Replace both parts for best results

OEM Part - Manufacturer #LA-1003

Glow bar igniter with wire harness

OEM Part - Manufacturer #WP31001556

8-32 X .750 HW LR SG

OEM Part - Manufacturer #WP8281196

Blower wheel, 3-1/8” deep, 8” fin diameter, 7-1/8” hub diameter, 20 standard fins, ½” diameter motor shaft, 7/16” motor shaft diameter to flat side of shaft. *If more than one blower wheel listed with your model please call with model and serial number to verify correct part.

OEM Part - Manufacturer #31001043